Chemistry is considered to be an important subject for the Class 12 Board Examination. Therefore, a deep understanding of the Chemistry Class 12 NCERT Syllabus is essential to score good marks.
Latest Update: Due to the Pandemic, the officials have reduced the CBSE Class 12 Syllabus for Chemistry by almost 30%. Scroll down to find out the deleted topics.
CBSE Class 12 Chemistry New Syllabus PDF for 2021-22
Below is the CBSE Class 12 Chemistry Syllabus for academic year 2020-2021 along with the marking scheme and time duration.
Revised CBSE Class 12 Chemistry Syllabus 2021-22 (Theory)
|Title||No. of Periods||Marks|
|1. Solid State||10||23|
|4. Chemical Kinetics||10|
|5. Surface Chemistry||08|
|6. General Principles and Processes of Isolation of Elements||08||19|
|7. p -Block Elements||12|
|8. d -and f -Block Elements||12|
|9. Coordination Compounds||12|
|10. Haloalkanes and Haloarenes||10||28|
|11. Alcohols, Phenols and Ethers||10|
|12. Aldehydes, Ketones and Carboxylic Acids||10|
|16. Chemistry in Everyday Life||06|
Students can check out the syllabus of class 6 to class 12 for all the subjects by visiting CBSE Syllabus page.
CBSE Class 12 Chemistry Syllabus 2022: Detailed Chapter-wise Topics
Unit I: Solid State
Classification of solids based on different binding forces: molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea). Unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell, packing in solids, packing efficiency, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical and magnetic properties. Band theory of metals, conductors, semiconductors and insulators and n and p type semiconductors.
Unit II: Solutions
Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid solutions, Raoult’s law, colligative properties – relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, osmotic pressure, determination of molecular masses using colligative properties, abnormal molecular mass, Van’t Hoff factor.
Unit III: Electrochemistry
Redox reactions, EMF of a cell, standard electrode potential, Nernst equation and its application to chemical cells, Relation between Gibbs energy change and EMF of a cell, conductance in electrolytic solutions, specific and molar conductivity, variations of conductivity with concentration, Kohlrausch’s Law, electrolysis and law of electrolysis (elementary idea), dry cell-electrolytic cells and Galvanic cells, lead accumulator, fuel cells, corrosion.
Unit IV: Chemical Kinetics
Rate of a reaction (Average and instantaneous), factors affecting rate of reaction: concentration, temperature, catalyst; order and molecularity of a reaction, rate law and specific rate constant, integrated rate equations and half-life (only for zero and first order reactions), concept of collision theory (elementary idea, no mathematical treatment), activation energy, Arrhenius equation.
Unit V: Surface Chemistry
Adsorption – physisorption and chemisorption, factors affecting adsorption of gases on solids, catalysis: homogenous and heterogenous, activity and selectivity of solid catalysts; enzyme catalysis, colloidal state: distinction between true solutions, colloids and suspension; lyophilic, lyophobic, multi-molecular and macromolecular colloids; properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulation, emulsion – types of emulsions.
Unit VI: General Principles and Processes of Isolation of Elements
Principles and methods of extraction – concentration, oxidation, reduction – electrolytic method and refining; occurrence and principles of extraction of aluminium, copper, zinc and iron.
Unit VII: p-Block Elements
- Group -15 Elements: General introduction, electronic configuration, occurrence, oxidation states, trends in physical and chemical properties; Nitrogen preparation properties and uses; compounds of Nitrogen: preparation and properties of Ammonia and Nitric Acid, Oxides of Nitrogen (Structure only); Phosphorus – allotropic forms, compounds of Phosphorus: Preparation and properties of Phosphine, Halides and Oxoacids (elementary idea only).
- Group 16 Elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties, dioxygen: preparation, properties and uses, classification of Oxides, Ozone, Sulphur -allotropic forms; compounds of Sulphur: preparation properties and uses of Sulphur-dioxide, Sulphuric Acid: industrial process of manufacture, properties and uses; Oxoacids of Sulphur (Structures only).
- Group 17 Elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; compounds of halogens, Preparation, properties and uses of Chlorine and Hydrochloric acid, interhalogen compounds, Oxoacids of halogens (structures only).
- Group 18 Elements: General introduction, electronic configuration, occurrence, trends in physical and chemical properties, uses.
Unit VIII: d and f Block Elements
General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends in properties of the first row transition metals – metallic character, ionization enthalpy, oxidation states, ionic radii, colour, catalytic property, magnetic properties, interstitial compounds, alloy formation, preparation and properties of K2Cr2O7 and KMnO4.
Lanthanoids – Electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction and its consequences.
Actinoids – Electronic configuration, oxidation states and comparison with lanthanoids.
Unit IX: Coordination Compounds
Coordination compounds – Introduction, ligands, coordination number, colour, magnetic properties and shapes, IUPAC nomenclature of mononuclear coordination compounds. Bonding, Werner’s theory, VBT, and CFT; structure and stereoisomerism, importance of coordination compounds (in qualitative analysis, extraction of metals and biological system).
Unit X: Haloalkanes and Haloarenes
Haloalkanes: Nomenclature, nature of C–X bond, physical and chemical properties, optical rotation mechanism of substitution reactions.
Haloarenes: Nature of C–X bond, substitution reactions (Directive influence of halogen in monosubstituted compounds only).
Uses and environmental effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.
Unit XI: Alcohols, Phenols and Ethers
Alcohols: Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only), identification of primary, secondary and tertiary alcohols, mechanism of dehydration, uses with special reference to methanol and ethanol.
Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophilic substitution reactions, uses of phenols.
Ethers: Nomenclature, methods of preparation, physical and chemical properties, uses.
Unit XII: Aldehydes, Ketones and Carboxylic Acids
Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties, mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes, uses.
Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.
Unit XIII: Amines
Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary, secondary and tertiary amines.
Diazonium salts: Preparation, chemical reactions and importance in synthetic organic chemistry.
Unit XIV: Biomolecules
Carbohydrates – Classification (aldoses and ketoses), monosaccharides (glucose and fructose), D-L configuration oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen); Importance of carbohydrates.
Proteins -Elementary idea of – amino acids, peptide bond, polypeptides, proteins, structure of proteins – primary, secondary, tertiary structure and quaternary structures (qualitative idea only), denaturation of proteins; enzymes. Hormones – Elementary idea excluding structure.
Vitamins – Classification and functions.
Nucleic Acids: DNA and RNA.
Unit XV: Polymers
Classification – natural and synthetic, methods of polymerization (addition and condensation), copolymerization, some important polymers: natural and synthetic like polythene, nylon polyesters, bakelite, rubber. Biodegradable and non-biodegradable polymers.
Unit XVI: Chemistry in Everyday life
Chemicals in medicines – analgesics, tranquilizers antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines.
Chemicals in food – preservatives, artificial sweetening agents, elementary idea of antioxidants.
Cleansing agents- soaps and detergents, cleansing action.
List Of Deleted Topics In CBSE Class 12 Chemistry Syllabus
The list of deleted topics in CBSE Class 12 Chemistry syllabus is given below:
|Unit Name||Topics Deleted|
|Solid State||Electrical and magnetic properties. Band theory of metals, conductors, semiconductors and insulators and n and p-type semiconductors.|
|Solutions||Solutions Abnormal molecular mass, Van’t Hoff factor|
|Electrochemistry||Electrochemistry Lead accumulator, fuel cells, corrosion, law of electrolysis (elementary idea), dry cell- electrolytic cells and Galvanic Cells|
|Chemical Kinetics||Chemical Kinetics Concept of collision theory (elementary idea, no mathematical treatment), activation energy, Arrhenius equation|
|Surface Chemistry||types of emulsions, catalysis: homogeneous and heterogeneous, activity and selectivity of solid catalysts; enzyme catalysis|
|General Principles and Processes of Isolation of Elements||Entire unit|
|p -Block Elements||Preparation and properties of Phosphine, Sulphuric Acid: industrial process of manufacture, Oxides of Nitrogen (Structure only); Phosphorus – allotropic forms, compounds of Phosphorus: Preparation and properties of Halides and Oxo acids (elementary idea only).|
|d -and f -Block Elements||Chemical reactivity of lanthanides, Actinides -Electronic configuration, oxidation states and comparison with lanthanide. Preparation and properties of KMnO4 and K2Cr2O7|
|Coordination Compounds||Coordination Compounds Structure and stereoisomerism, importance of coordination compounds (in qualitative analysis, extraction of metals and biological system).|
|Haloalkanes and Haloarenes||Haloalkanes and Haloarenes Uses and environmental effects of -dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.|
|Alcohols, Phenols and Ethers||Uses with special reference to methanol and ethanol.|
|Aldehydes, Ketones and Carboxylic Acids||Aldehydes, Ketones and Carboxylic Acid|
|Amines||Amines Diazonium salts: Preparation, chemical reactions and importance in synthetic organic chemistry.|
|Biomolecules||Oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen), importance of carbohydrates. Vitamins– classification and functions. Enzymes. Hormones – Elementary idea excluding structure.|
|Chemistry in Everyday Life||Entire chapter|
CBSE Class 12 Chemistry Practical Syllabus along with Marking Scheme
|Evaluation Scheme for Examination||Marks|
|Content Based Experiment||06|
|Class record and viva||04|
The Class 12 Chemistry Practical syllabus 2021-22 is as under:
- Surface Chemistry
- Preparation of one lyophilic and one lyophobic solution. Lyophilic sol – starch, egg albumin and gum. Lyophobic sol – aluminium hydroxide, ferric hydroxide, arsenious sulphide.
- Dialysis of sol-prepared in (a)
- Study of the role of emulsifying agents in stabilizing the emulsion of different oils.
- Chemical Kinetics
- Effect of concentration and temperature on the rate of reaction between Sodium Thiosulphate and Hydrochloric acid.
- Study of reaction rates of any one of the following:
- Reaction of Iodide ions with Hydrogen Peroxide at room temperature using different concentrations of Iodide ions.
- Reaction between Potassium Iodate, (KIO3) and Sodium Sulphite: (Na2SO3) using starch solution as indicator (clock reaction)
Any one of the following experiments-
- Enthalpy of dissolution of Copper Sulphate or Potassium Nitrate.
- Enthalpy of neutralization of strong acid (HCI) and strong base (NaOH).
- Determination of enthalpy change during interaction (Hydrogen bond formation) between Acetone and Chloroform.
Variation of cell potential in Zn/Zn
2+|| Cu2+/Cu with change in concentration of electrolytes (CuSO4 or ZnSO4) at room temperature.
- Separation of pigments from extracts of leaves and flowers by paper chromatography and determination of Rf values.
- Separation of constituents present in an inorganic mixture containing two cations only (constituents having large differences in Rf values to be provided).
- Preparation of Inorganic Compounds
- Preparation of double salt of Ferrous Ammonium Sulphate or Potash Alum.
- Preparation of Potassium Ferric Oxalate.
- Preparation of Organic Compounds
Preparation of any one of the following compounds-
- Di -benzalAcetone
- Aniline yellow or 2 – Naphthol Aniline Dye.
- Tests for the functional groups present in organic compounds
Unsaturation, alcoholic, phenolic, aldehydic, ketonic, carboxylic and amino (Primary) groups.
- Characteristic tests of carbohydrates, fats and proteins in pure samples and their detection in given foodstuff
- Determination of concentration/ molarity of KMnO4 solution by titrating it against a standard solution of
- Oxalic acid,
- Ferrous Ammonium Sulphate
- Qualitative analysis
Determination of one cation and one anion in a given salt.
Cation : Pb2+ Cu2+ As3+ Al3+ Fe3+ Mn2+ Zn2+ Cu2+, Ni2+ Ca2+ Sr2+ Ba2+ Mg2+ NH4+
Anions: (CO3)2- S2- (SO3)2- (NO2)- (SO4)2- Cl- Br- I- PO3-4 (C2O4)2- CH3COO- NO3-
Scientific investigations involving laboratory testing and collecting information from other sources
A few suggested projects.
- Study of the presence of oxalate ions in guava fruit at different stages of ripening.
- Study of quantity of casein present in different samples of milk.
- Preparation of soybean milk and its comparison with the natural milk with respect to curd formation, effect of temperature, etc.
- Study of the effect of Potassium Bisulphate as food preservative under various conditions (temperature, concentration, time, etc.)
- Study of digestion of starch by salivary amylase and effect of pH and temperature on it.
- Comparative study of the rate of fermentation of following materials: wheat flour, gram flour, potato juice, carrot juice, etc.
- Extraction of essential oils present in Saunf (aniseed), Ajwain (carum), Illaichi(cardamom). Study of common food adulterants in fat, oil, butter, sugar, turmeric power, chilli powder and pepper.
- CBSE Syllabus for Class 12 Chemistry Syllabus 2021-22
- Download Revised CBSE Class 12 Chemistry Syllabus 2021-22
- CBSE Class 12 Chemistry Syllabus 2021-22: Download Revised 12th CBSE Chemistry Syllabus